The X-Series electronic power supplies for LEDs is designed to deliver power to today’s
LED light sources.
The advanced circuitry of the X-Series enables it to operate smoothly with line power dimmer switches as well as architectural type dimming controls, without using an interface. All X-Series power supplies are not limited by a minimum load requirement like previous conventional transformers.
X-Series supplies are available in a wide variety of combinations of common input and output voltages.
You are sure to find a power supply to meet the requirements of your most demanding applications.
Advantages
- Miniature casing
- Designed for architectural lighting control systems
- Compatible with regular line dimmers
- Smooth dimming with LED light sources
- No minimum load requirement
- Easily controllable
- Noiseless operation under dimming conditions
- No zero cross-over blinking
- Suitable for LED loads
- Works well with MR16 replacement LEDs
- Approved to FKSZ2/8
- Approved to QQIJ2
- Approved to CSA C22.2 No. 107.1-01
Specifications
- Available in 120VAC, 230VAC, 277VAC input
- Available in 12 VAC, 12VDC, 24VAC, 24VDC output
- Maximum load of 60W or 75W
- THD < 13%
- Power factor > 0.97 (without dimmer with LED light strip or halogens)
- Class A insulation isolation transformer
- Maximum casing temperature of 90 °C
- Maximum amb. oper. temp. of 40 °C
- Suitable for damp and dry locations
